Page 1 of 1

Flywheel Identification

PostPosted: Thu Oct 24, 2019 6:34 pm
by hayleyl
Can anyone tell me if there are there different markings / stamps between 750 & 900 flywheels? (apart from physically measuring crankpin to pinion)
And what identifies cast number (flywheels) BGB 23932-52 C2. Cheers Hayley

Re: Flywheel Identification

PostPosted: Thu Oct 24, 2019 7:25 pm
by panic
750 flywheels are marked "52", 900 are "54"

Re: Flywheel Identification

PostPosted: Thu Oct 24, 2019 7:34 pm
by hayleyl
Yep, thought as much. Cheers Hayley

Re: Flywheel Identification

PostPosted: Thu Oct 24, 2019 9:19 pm
by wz507
This does not relate to your query about differences in part/casting numbers, but comparing the subject flywheels, one would also notice the straight central bores that receive the pressed in pinion and PTO shafts in the -52 flywheels vs the tapered central bores found in the -54 flywheels that receive tapered/nutted pinion and PTO shafts .