I am new this forum but have some experience with other HD models (mainly Panheads).
I have taken the heads off a KH engine. There was a 1/12 " thick copper cylinder head gasket between the cylinders and the heads. Thanks to this super forum I know that KH engines do not have a cylinder head gasket and that the piston comes out of the cylinder at TDC.
To make sure that I put everything correctly together, I would like to know how much the piston actually comes out of the cylinder at TDC and how deep the recess in the head is above the cylinder bore. It would be really helpful if somebody could provide this information.
Thanks a lot in advance!
Kind regards
Monti