harleyKmodel

found these race results online...see lots of kr and k serial numbers if anyone wants to check for one of there current bikes and how well it finished

Hum, some echo in here !!! I've already posted the full list link in the 66XLR topic...

http://www.caimag.com/forum/showthread.php?11735-Race-motor-numbers/page3

Patrick

sry man...in the midst of my 52 k project and i musta looked and hundreds of pics and read many forums,4 different parts books and a old khk racing book.,too much info and not enough memory.i never put two and two together when i found this on facebook that it was the same as your full posting...
a pic of my current progress...tins are at the painter,i need 19''rims and spokes..

Sean, your 52 is looking good! Keep up the good work. So you need a rim or entire wheel? Erik K

i have two oem 19" rims but once the chrome shop started to clean buff them they found the inner area was too thin from rust pitting...i have the hubs just need two rims and spoke sets,i talked to sporty specalties and they have some repop 18" rims and a 19 front rim but not a 19 rear...when cash flow starts flowing again ill try and find a good used rear 19 and maybe go with the repop 19 front.thats the last big part ill be needing aside from a couple muffler clamps and oil presure switch....currently i have a 45 seat on the orig k t bar and at some point ill find the correct seat,as well the proper kicker pedal.

That`s a plan. Kirk is a good man. Remember that the front rim has different hole layout of course, to `63 with the `pancake` brake. A bit at a time! I`m starting final reassembly of my 56KHK. Started with bare cases 1990. Just removed the repop neck cups, exchanging for original recad and painting the 56 only frame. Anyone need about 8 sets of repop cad neck cups?? I`m going to have a lot of that kind of stuff looks like, bought years back when I thought they were the way to go, when nothing else was available...Erik K