Page 1 of 2

Pricey XL

PostPosted: Tue Jan 12, 2016 10:50 am
by Mike
Did you guys catch this beautiful midnight blue XL at the Meacham auction in Las Vegas last week? The bid goes on… had a high bid of $50k but wasn't enough. Ben Meacham told me the reserve is $60k but owner would consider offers.

https://www.mecum.com/lot-detail/LV0116 ... L/4-Speed/

Mike

Re: Pricey XL

PostPosted: Tue Jan 12, 2016 11:54 am
by Yard Dog
Beautiful Bike . One of Pappy Pierce's out of Dekalb , IL. If the current owner wants that kind of money , maybe he should ask some of the people on this forum for advice on making it more correct ! First look shows me at least 7 incorrect bits . Anyone want to play ?

Jack

Re: Pricey XL

PostPosted: Tue Jan 12, 2016 12:14 pm
by EKHKHK56
Nice to hear the value is up regardless!

Re: Pricey XL

PostPosted: Tue Jan 12, 2016 1:01 pm
by Mike
Yard Dog, I would like to play but am a neophyte on these little bikes. How about some hints???
Mike

Re: Pricey XL

PostPosted: Tue Jan 12, 2016 1:42 pm
by JerrryR
Wrong Kicker Cover, 58 CH front fender, 58 Kicker Arm, Wrong passenger pegs, wrong horn power pack mount.

Re: Pricey XL

PostPosted: Tue Jan 12, 2016 2:47 pm
by JerrryR
For comparison the Harley Museum 57XL.

Museum 57XL 3.jpg
Museum 57XL 3.jpg (252.01 KiB) Viewed 15176 times


Museum 57XL 2.jpg
Museum 57XL 2.jpg (194.09 KiB) Viewed 15176 times


Museum 57XL 4.jpg
Museum 57XL 4.jpg (247.14 KiB) Viewed 15176 times

Re: Pricey XL

PostPosted: Tue Jan 12, 2016 2:50 pm
by Mayday53
Ha, I only wish my KHK would be worth that much...then again, I am building it to be a rider not a show bike. I have seen a couple 55 KHK's go over the $18K mark, but they are usually "special" bikes restored down to the number of threads on the fasteners.

Re: Pricey XL

PostPosted: Tue Jan 12, 2016 2:56 pm
by Yard Dog
Good start brotherJerry , but I think that you meant later CH fender !

Mike , I just reread my original post and realized that I probably sound like an arrogant dick ! Whoever did this build did a great job . I think as we network and nitpick we raise the bar on correct restorations . I hate to think how bad my bikes would stand to scrutiny . Look in the area around the carb . Another area is around the horn , year correct , but not for this early VIN .

Jack

Re: Pricey XL

PostPosted: Tue Jan 12, 2016 5:30 pm
by thefrenchowl
A restoration is never correct...

Patrick

Re: Pricey XL

PostPosted: Tue Jan 12, 2016 9:32 pm
by strong56KH
It is very nicely done, but I'll play along with what I see besides what Jerry and Jack have already mentioned. It has a T-3 vs. Cycle Beam sealed beam; vinyl covered brake and clutch cables vs. cotton braided; later rear brake lever with the reversed rivets; what appears to be an original choke lever on the left side, but then it has the 58 choke lever on the backing plate; and I don't see a speedo cable. For that price it must be original paint?