eraser.com

Good places to get work done

eraser.com

Postby jOe » Mon Apr 17, 2017 10:37 pm

-------- eraser.com -------- good source for fiberglass bristle brushes. Used mainly in the electronics industry, circuit board work. They work great for rust removal, especially on those tough to get out blemishes on hardware, bolt heads,washers etc. They may seem a little pricey, you can't beat it for the visual detail results .
jOe
 
Posts: 251
Joined: Sat Nov 29, 2014 3:46 pm
Location: The Green Felt Jungle

Re: eraser.com

Postby Mutt » Tue Apr 18, 2017 8:13 am

is there a video of this product?
Mutt
 
Posts: 148
Joined: Sat Apr 16, 2016 8:34 pm

Re: eraser.com

Postby jOe » Tue Apr 18, 2017 9:17 am

I didn't see one on the web site. YouTube maybe.
jOe
 
Posts: 251
Joined: Sat Nov 29, 2014 3:46 pm
Location: The Green Felt Jungle

Re: eraser.com

Postby jOe » Tue Apr 18, 2017 9:21 am

Do a google search- fiberglass brushes. Good results
jOe
 
Posts: 251
Joined: Sat Nov 29, 2014 3:46 pm
Location: The Green Felt Jungle

Re: eraser.com

Postby wz507 » Tue Apr 18, 2017 9:27 am

Mutt wrote:is there a video of this product?

There's a video on their product page.

https://www.eraser.com/products/compone ... -eraser-2/
wz507
 
Posts: 284
Joined: Fri Dec 11, 2015 9:13 pm

Re: eraser.com

Postby jOe » Tue Apr 18, 2017 11:09 pm

The footage of cleaning that sink was a nice touch....
jOe
 
Posts: 251
Joined: Sat Nov 29, 2014 3:46 pm
Location: The Green Felt Jungle

Re: eraser.com

Postby wz507 » Wed Apr 19, 2017 7:37 am

jOe wrote:-------- eraser.com -------- good source for fiberglass bristle brushes. Used mainly in the electronics industry, circuit board work. They work great for rust removal, especially on those tough to get out blemishes on hardware, bolt heads,washers etc. They may seem a little pricey, you can't beat it for the visual detail results .

They offer quite a variety of fiberglass brushes ranging from the metal bodied style to the plastic covered brushes in 1/4", 5/8" and 1" diameter, not to mention long and short variants, and all of the foregoing in both coarse and fine grades. That said, which ones have you purchased and which are your favorites? Thanks.
wz507
 
Posts: 284
Joined: Fri Dec 11, 2015 9:13 pm

Re: eraser.com

Postby jOe » Wed Apr 19, 2017 2:33 pm

I have the 1/4" metal bodied one, which is pretty much expended now. I'm going to look for replacement bristles at the local electronics store, but they can be found at art supply stores also, termed 'scratch brushes'.
The small brushes are great for detail work. The large brushes could be good for sheet metal, frames and larger pieces, but I haven't used them.
jOe
 
Posts: 251
Joined: Sat Nov 29, 2014 3:46 pm
Location: The Green Felt Jungle

Re: eraser.com

Postby wz507 » Wed Apr 19, 2017 3:24 pm

jOe wrote:I have the 1/4" metal bodied one, which is pretty much expended now.


I'm not trying beat you or the subject to death, but interested as to whether you have the fine (pictured as red body on the site) or coarse (pictured as blue bodied on the site). I see they have both fine and coarse replacement brushes on the site but only available as 25 packs for $105 which I suspect would be several lifetime supplies. :)
wz507
 
Posts: 284
Joined: Fri Dec 11, 2015 9:13 pm

Re: eraser.com

Postby jOe » Wed Apr 19, 2017 4:59 pm

Coarse, blue. I know it's pricey for us, but it's for proudction purposes
jOe
 
Posts: 251
Joined: Sat Nov 29, 2014 3:46 pm
Location: The Green Felt Jungle

Next

Return to Reliable and Reasonable Resources

Who is online

Users browsing this forum: No registered users and 0 guests

cron