counter shaft gear spacer

Production K Models

counter shaft gear spacer

Postby blewandoski » Tue Nov 30, 2021 5:49 pm

just started working on 52 K. Missing a few parts. Right now looking for the counter shaft gear spacer (35809-52)
cant seem to find any. Does anyone have the spec's for that part? Or can I sub the gear with a 56 year one (35809-56) I can find plenty of those
blewandoski
 
Posts: 4
Joined: Wed Nov 24, 2021 2:13 pm

Re: counter shaft gear spacer

Postby JerrryR » Tue Nov 30, 2021 11:54 pm

I don't believe the 35809-52 & the 35809-58 are interchangeable. The ID of the 35809-58 spacer is quite a bit larger than the -52 spacer and the widths are different. I do have one I would loan if you need to have one made.

35809-52 & 58.jpg
35809-52 & 58.jpg (180.83 KiB) Viewed 730 times
User avatar
JerrryR
 
Posts: 389
Joined: Sun Jul 20, 2014 9:39 pm

Re: counter shaft gear spacer

Postby blewandoski » Wed Dec 01, 2021 4:08 pm

thanx for loan offer Jerry. I do know a gear head who can make one but I think a few pictures using a micrometer would work just as well...and saves on the shipping cost ;)
blewandoski
 
Posts: 4
Joined: Wed Nov 24, 2021 2:13 pm

Re: counter shaft gear spacer

Postby 55panman » Wed Dec 01, 2021 6:00 pm

Yes Jerry, ID, OD and thickness would be quite handy for this spacer as I believe I need one also. Thanks, Ron
55panman
 
Posts: 153
Joined: Wed Oct 28, 2015 4:16 pm

Re: counter shaft gear spacer

Postby JerrryR » Wed Dec 01, 2021 11:55 pm

Hi Ron and Blewandowski, My first post shows most of the dimensions but may not have been noticed since the picture waas large and you needed to scroll to the right to see the dimensions. In going back and looking I realized I was not consistent with terms used with the -52 & -58 spacers. I redid the image, shrunk it and am reposting it here along with pictures of the measurements being taken. I will use two post since I can only do 3 per post. Let me know if you need additional information or want to borrow the part. Good luck, JerryR

35809-52 & 58.jpg
35809-52 & 58.jpg (222.7 KiB) Viewed 626 times


35809-52, 1.jpg
35809-52, 1.jpg (218.68 KiB) Viewed 626 times


35809-52, 2.jpg
35809-52, 2.jpg (225.01 KiB) Viewed 626 times
User avatar
JerrryR
 
Posts: 389
Joined: Sun Jul 20, 2014 9:39 pm

Re: counter shaft gear spacer

Postby JerrryR » Thu Dec 02, 2021 12:00 am

35809-52, 3.jpg
35809-52, 3.jpg (211.36 KiB) Viewed 624 times


35809-52, 4.jpg
35809-52, 4.jpg (192.34 KiB) Viewed 624 times


35809-52, 5.jpg
35809-52, 5.jpg (201.88 KiB) Viewed 624 times
User avatar
JerrryR
 
Posts: 389
Joined: Sun Jul 20, 2014 9:39 pm

Re: counter shaft gear spacer

Postby blewandoski » Fri Dec 03, 2021 11:05 am

thanx again Jerry...that is just what I needed
blewandoski
 
Posts: 4
Joined: Wed Nov 24, 2021 2:13 pm

Re: counter shaft gear spacer

Postby blewandoski » Thu Jan 13, 2022 3:49 pm

last question what type of steel is the spacer made out of?
blewandoski
 
Posts: 4
Joined: Wed Nov 24, 2021 2:13 pm

Re: counter shaft gear spacer

Postby JerrryR » Thu Jan 13, 2022 4:54 pm

That question is above my pay grade. This might be the reason I need to send it to you unless someone else knows.
User avatar
JerrryR
 
Posts: 389
Joined: Sun Jul 20, 2014 9:39 pm

Re: counter shaft gear spacer

Postby dlxl66elxl » Thu Jan 13, 2022 8:19 pm

I may have one available, PM me. Dave
dlxl66elxl
 
Posts: 19
Joined: Wed Apr 16, 2014 5:36 pm

Next

Return to K, KK, KH, KHK

Who is online

Users browsing this forum: No registered users and 3 guests

cron