Hi all,
What tool/wrench do you recommend for tightening/loosening KH Lower Valve/Tappet Covers? I found a Harley tool, 94501-52, Valve Cover and Tappet Wrench, listed in Shop Dope 404, that says "Fits K Models", but I haven't found a source for it. I have a flat/thin 32 mm open end wrench that fits the hex on the covers, but is nearly impossible to get on the hex of the covers, as it runs into the other cover, isn't bent to reach over the magneto, or on the front exhaust cover, runs into the generator. I hoping you can recommend an alternate tool that has worked for you, or a source for the Harley tool if that has work for you.
Thanks, Dennis